energy efficient property services

Freephone: 0800 644 6190

Email: info@energysave-uk.co.uk

SecoTHERM Energy Saving Wall Coating


How does this technology work?

Damp walls are thermal bridges – if moisture collects in the pores of the wall, more heat is transferred than would be possible if the cavities were filled with air. The thermal conductivity of the wall decreases enormously with dampness. Tests have shown that a damp content of 5% in a plain brick wall, for example, can lower insulation performance by up to 50%. This is especially pertinent where cavity wall insulation has been installed because when the insulation is wet it loses its thermal value. Many house owners don´t realise this fact.

View Guarantee Certificate


Proven Performance

energy saving wall coating secotherm

Water absorption can be minimized dramatically by treating with secoTHERM™ on a porous brick the water absorption will be reduced by more than 95%.

secoTHERM™ has been tested to EN ISO 15148, demonstrating its hygrothermal performance on concrete, mortar, brick, and sandstone. The product penetrates deeply into the substrate and offers protection for up to 20 years.

View ISO 15148

Improve the appearance, look and performance of your masonry.

Biological growth and stains do not just look dirty but can also result in surface decay due to frost damage and can cause major humidity problems.

secoTHERM™ creates a self cleaning surface that will protect against dirt, pollution, damp and UV light degradation.

energy saving wall coatings


How Does This Work?

secoTHERM™ chemically bonds to the substrate up to 17mm and is therefore extremely resistant to weathering and UV rays.

secotherm wall coating

The protected surface repels water and microorganisms, and dirt finds it difficult to adhere, any particles are simply washed away by rain or just by mild cleaning. The building remains permeable to water vapor.


Benefits of secoTHERM™

Benefits of masonry surfaces treated with secoTHERM™:

  • Improves the thermal efficiency of the masonry by keeping it dry (Potential energy savings up to 30% or more depending on the porosity of the masonry.)
  • Maintaining the thermal properties of cavity wall insulation
  • Reduction in heat loss
  • Offers a self-cleaning surface
  • Slow ageing or break down of surface
  • Less susceptible to the growth of microorganisms

Start Your Enquiry

Fill out the details below to start an enquiry:


Why Choose Us?

Family Run Business

Vast Experience

Extensive Central UK Coverage


Proven Performance from Trusted Brands

Testimonials

  • Our roof renovation was carried out on 24th-25th June 2015. The work was done efficiently, with the minimum of disruption. Our property was left clean and tidy. Your operatives, Jason and Brian, were polite and friendly. They explained each part of the operation as they went along. Altogether, a very satisfied job – Well done! Many thanks.

    Mr P J West (Derby)

  • Following the work carried out on my property on Broadhome Lane, Belper. I would like to say what a totally satisfied customer I am. I would highly recommend Energysave UK for their professionalism throughout.

    Mr Jackson (Derbyshire)

  • Very Satisfied with the job. Simon explained the procedure and was most helpful – a credit to your company. No problems at all.

    Mr Andrews (Allestree)

  • Fast and efficient friendly service from all the people we met, from initial contact to final inspection. The actual installation of the wall coatings was done with the minimum of mess. Windows, doors and frames were protected and then washed and wiped down (Just in case) All dirty materials, empty containers etc. were removed from site on clear up - Can’t fault the service so far.

    Mr Tomlinson (Nottingham)